Electrolux 10500 VI manual Child safety, During use

Page 7

Safety instructions

Child safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance.

Pets and children have been known to climb into washing machines. Please check the drum before use.

Keep all packaging well away from children.

Keep all detergents in a safe place out of children’s reach.

When disposing of the appliance, cut off the mains cable, and destroy the plug. Disable the door catch to prevent young children being trapped inside.

During use

Always unplug the appliance and turn off the water tap after use.

This appliance is designed for domestic use only. If the machine is used for any other purposes or is not used correctly, the manufactur- er accepts no responsibility for any possible damage that might occur.

For safety reasons, the appliance must not be modified.

Use only detergents suitable for washing machines and follow the manufacturer’s instructions.

Garments which have been in contact with flammable solvents should not be machine washed.

Dyes and bleaching agents may only be used if specifically permitted by the manufacturer of these products. We cannot be held liable for any damage.

7

Image 7
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents General safety Safety instructionsInstallation During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelAccording to the type of laundry START/PAUSE button Delay Start buttonON/OFF button Mains-on lightThis function cannot be used with Quick Wash and Prewash Programme Option buttonsQuick Wash Programme progress display DisplayDisplay shows the following information Opening the door after the programme has started Cancelling/Altering a programmeDetergent dispenser drawer Programme chartBefore the first wash Sorting out and preparing the laundry Preparing the wash cycleCotton Types of fabric and care labelsSynthetics Easy-cares Delicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the desired wash programme Selection of the Delay Start optionStarting the programme If the delay start option has been selected,At the end of the programme Wash programmes Programme chartWool Special programmesAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorPull out the filter Door sealDrain filter Water inlet filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseWater pressure 50-800 kPa Technical dataThis appliance complies with the following EC directives Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceRear view Previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagLevelling PositioningSet the machine Water drainage Water inlet cold water connection onlyDo not connect to a hot water supply Covered with water Interest of the environmentUpright standpipe should have a mini Elbow to the top of the pipe see diaBrown Live Electrical connectionsAccordance with the following code Green and Yellow Earth BluePermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H With the appliance Installed adjust all fourDue to the additional 40 mm height required, ensure Drill four fixing holes see Position the base into