Dyson CRO2 manual Additional options, Memory Door lock, Child lock

Page 15

Additional options

To activate any of the additional options below after you have selected your programme, press your desired option button once; press it again to cancel the option.

Minimum iron

This holds your laundry in water after the final rinse to minimise creasing. To spin the laundry and finish the programme, press the ‘Start’ button. Minimum iron is not suitable on all programmes but is particularly good for synthetics and delicates. (Please

refer to section 9 02).

Start delay

Selected models only

This allows you to programme the wash to finish when you want

it to. Use the and arrows to adjust the settings eg: if you want the wash to start in 10 hours

time, press the arrow 10 times and press ‘Start’ to activate it. The display will countdown the delay time to start. Press and hold the ‘Cancel’ button at any time to cancel the start delay, press and hold ‘Cancel’ again to cancel cycle.

Memory

Door lock

The door lock light indicates that the outer door is locked.

Soil type selection

Soil type can be adjusted on the Cotton and Synthetic programmes only, cleaning from everyday washing to heavily stained football kits.

Dirt

For lightly soiled laundry.

Dirt & stains

For typical everyday soiling.

Heavy stains

For heavily stained items.

(see section 9 02).

Pre-wash

This removes excess dirt before the main wash cycle.

Extra rinse

This adds one extra rinse. On some models, up to 3 extra rinses can be selected by pressing the button up to 3 times. To de- activate press repeatedly until light is extinguished. For people with sensitive skin.

Rinse & spin/Spin only

Press once for ‘Rinse & spin’ option, press twice for ‘Spin’ only option and press a third time to cancel.

Selected models only

This allows you to store the three programmes you use the most. Select the programme with any additional options, then press and hold one of the memory buttons for one second. A beep will confirm the programme has been stored.

To select a stored programme, press the relevant ‘Memory’ button and then press ‘Start’.

To re-programme a stored cycle, follow the steps for programming a memory cycle.

Child lock

This option locks the settings on the control panel and locks the outer door. Once a programme is running, use this option to prevent it from being altered, paused or cancelled. You can also use the Child lock when the machine is not in use to keep the outer door locked.

Press and hold the ‘Minimum iron’ button to activate or cancel the Child lock, before starting the cycle.

Image 15
Contents User guide Page Contents Overview of your Dyson washing machine OverviewOnly 2-drum wash action ContrarotatorTMDo not Free registration Important safety notesDyson service User InstructionsInner transit packaging removal Before installationDrainage, water supply and electricity InstallationSpecification LocationDo not use the hose hook for under-sink connections Drainage Water supplyAfter installation Electrical installationLoading the washing machine Detergent use OperationStarting your wash Pause your wash cycle Cancel your wash cycleEnd of wash cycle Start your wash cycleOptional settings Additional options Memory Door lockChild lock Fabric care and advice 9 Programme table Self clean cycle on selected models only MaintenanceAlways wash hands after handling the coin trap Coin trapEmergency door release Water filterTroubleshooting Symptom Possible causes Solutions TroubleshootingSection LCD display message Possible causes SolutionsN U I N E C O M P O N E N T S