Maintenance | 10 02 |
Coin trap
Never remove any objects from the coin trap while the washing machine is switched on, still running or paused during a wash. Always cancel cycle, switch off machine and allow the water to cool before opening the coin trap.
• Empty the coin trap when a blockage has occurred.
Childproof tab
Coin trap window
Flow accelerator cap
Plug
1Place a tray or shallow dish underneath the coin trap.
2Using the Dyson spanner, lever the plug in the middle of the coin trap. The water will drain from the plug.
Side view: lever spanner through 45o
3If the tray or dish is full, push the plug into its original position by hand, empty the tray or dish and repeat the process.
4Once the water has been removed (a small quantity of water will remain below the level of the plug), lift and hold the childproof tab using a small screwdriver or the reverse end of the Dyson spanner. Turn the window anticlockwise until it is released.
5Remove any objects from the coin trap.
6If any more items seem to be blocking the coin trap, pull out the flow accelerator cap.
•Remove any items and firmly push the flow accelerator cap back into place.
To replace the coin trap window:
•Ensuring the seal is in place, lubricate with a drop of washing up liquid.
•Make sure the plug is pushed back into the closed position.
•Line up the ears at 12 o’clock position and rotate 360° clockwise until it clicks into child proof tab at top.