Whirlpool 3396304 Understanding the Finish Guard cycle, Using the Lockout feature, Status Lights

Page 14

Understanding the FINISH GUARD” cycle

When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. To protect the load, select the FINISH GUARD cycle.

l

l

l

If you do not open the door within a few minutes after a cycle ends, the FINISH GUARD cycle protects your load.

Your dryer tumbles the load (without heat) for a few seconds every few minutes. This tumbling rearranges and fluffs the load to help avoid wrinkles that set in when the load remains in the dryer.

The FINISH GUARD cycle protects your load for about 150 minutes if the load remains in the dryer and the door is not opened.

lA signal will sound every few minutes during the FINISH GUARD cycle. The signal and the cycle will stop when the door is opened, or if you press CANCEL.

Using the Lockout feature

The Lockout feature allows you to “lockout” others from using your electronic controls. This feature is useful to lock the electronic controls, and to prevent the machine from being started, if you have young children.

To lock/unlock control panel

l Press and hold SELECT/LOCKOUT for 5 seconds.

The light glows by Lockout when the control panel is locked.

NOTE: You can only select Lockout when your dryer is not running and your control panel is off.

PRESS YOU SEE AND HOLD

Status

lights

 

Status lights show you what your dryer is

Status

doing. If the status lights are blinking, there has been a power failure. Press CANCEL. Make new selections, if desired.

14

Image 14
Contents Electronicgas and Electricdryers Serial Number Dealer Your safety is important to usThank you for buying a Whirlpool@ appliance Purchase DateUnderstanding Safety What to do if YOU Smell GASImportant Safety Instructions Understanding your responsibilitiesUser Cards FeaturesOther features not shown This Section Using the electronic touch controlsBefore starting your dryer One tone if the dryer accepts your selectionCydesITemps Stopping and restartingYour dryer Using Automatic drying Press SelectUsing Timed drying Until the light glows by the CycleITemp desiredPress ON/SELECT until the light glows by Selecting cycles/tempsTo select a different cycle/ temp Cycle chart Cotton and LlnensSee Warning on Fluff Air-No HeatRubber, Plastic or Heat Sensltlve items Option Selection Chart Using Your Options/FeaturesUsing Cycle Signal Finish Guard Options OptionsStatus Lights Using the Lockout featureUnderstanding the Finish Guard cycle To lock/unlock control panelLint signal Maintenance-every loadCleaning the lint screen Caring For Your DryerCleaning the dryer interior Maintenance-as neededCleaning a clogged lint screen Cleaning the dryer exteriorChanging the drum light ElectrIcal Shock and Fire HazardRemoving accumulated lint Wire clips see View C or damaging wires Electrical powerAgainst side of dryer. Avoid disconnecting Vacuum cleaner. Avoid damaging wiresDrying tips Before you dryThis SortingDrying special-care items Pillows, stuffed toysDlapers, baby clothes Elastic Items Vacation care Using dryer fabric softenersSaving energy Were Dried Llnt Lint screen is clogged Load Is properly Solving laundering problemsEnough Detergent Was used Below 45F 7C Dryer To Installation Instructions Lint screenMoisture in the load to be Duct or outsideIs the dryer door firmly closed? If You Need Assistance Or ServiceBefore calling for assistance ’ When asklng for help or servlce If you need service’If you are not satisfied with how the problem was solved If you need assistanceFull ONE-YEAR WARRANlY From Date of Purchase Defective in materials or workmanship