Whirlpool 3396304 warranty Maintenance-as needed, Cleaning a clogged lint screen

Page 16

Maintenance-as needed

Use the following suggestions about cleaning and lint removal to maintain your dryer and keep it operating efficiently.

Cleaning a clogged lint screen

Laundry detergents and fabric softeners can cause a residue buildup on the lint screen. A clogged lint screen can extend drying times.

Clean the lint screen every six months or more frequently if it becomes clogged due to a residue buildup. Use the following method:

1.Wet both sides of lint screen with hot water.

2.Wet a nylon brush with hot water and liquid detergent.

3.Scrub lint screen with the brush until all residue buildup is removed.

4.Rinse with hot water.

5.Thoroughly dry lint screen with a clean towel and replace in dryer.

Cleaning the dryer interior

l

l

l

Electrlcal Shock,

Personal InJury and Flre Hazard

Turn off the electrical power before cleaning the interior.

Make sure the dryer is cool. Use nonflammable cleaner.

Failure to do so could result in electrical shock or injury, fire or explosion.

Garments which contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. If you want to remove stains from the dryer drum, use powdered laundry detergent.

1.Make a paste with detergent and very warm water.

2.Apply paste to a soft cloth and scrub area until all excess dye is removed.

3.Wipe thoroughly with a damp cloth.

4.Tumble a load of rags to dry.

Cleaning the dryer exterior

Wipe with a soft, damp cloth.

16

Image 16

Contents Electronicgas and Electricdryers Your safety is important to us Thank you for buying a Whirlpool@ applianceSerial Number Dealer Purchase DateUnderstanding Safety What to do if YOU Smell GASImportant Safety Instructions Understanding your responsibilitiesOther features not shown FeaturesUser Cards Using the electronic touch controls Before starting your dryerThis Section One tone if the dryer accepts your selectionYour dryer Stopping and restartingCydesITemps Using Automatic drying Press SelectUsing Timed drying Until the light glows by the CycleITemp desiredTo select a different cycle/ temp Selecting cycles/tempsPress ON/SELECT until the light glows by Cycle chart Cotton and LlnensRubber, Plastic or Heat Sensltlve items Fluff Air-No HeatSee Warning on Using Your Options/Features Using Cycle Signal Finish Guard OptionsOption Selection Chart OptionsUsing the Lockout feature Understanding the Finish Guard cycleStatus Lights To lock/unlock control panelMaintenance-every load Cleaning the lint screenLint signal Caring For Your DryerMaintenance-as needed Cleaning a clogged lint screenCleaning the dryer interior Cleaning the dryer exteriorChanging the drum light ElectrIcal Shock and Fire HazardRemoving accumulated lint Electrical power Against side of dryer. Avoid disconnectingWire clips see View C or damaging wires Vacuum cleaner. Avoid damaging wiresBefore you dry ThisDrying tips SortingDrying special-care items Pillows, stuffed toysDlapers, baby clothes Elastic Items Saving energy Using dryer fabric softenersVacation care Enough Detergent Was used Solving laundering problemsWere Dried Llnt Lint screen is clogged Load Is properly To Installation Instructions Lint screen Moisture in the load to beBelow 45F 7C Dryer Duct or outsideBefore calling for assistance If You Need Assistance Or ServiceIs the dryer door firmly closed? If you need service’ If you are not satisfied with how the problem was solved’ When asklng for help or servlce If you need assistanceFull ONE-YEAR WARRANlY From Date of Purchase Defective in materials or workmanship