Whirlpool 3396304 warranty Using Automatic drying, Press Select

Page 8

Using Automatic drying

Use Automatic drying to dry most loads. Your dryer automatically shuts off when the selected dryness is reached.

Reg Dry is the preset automatic dryness selected for Reg/Heavy-High, Perm Press- Med, and Delicate+Low cycles. You can change the Automatic setting (or select a Timed setting) to match your load.

1. Press ON/SELECT

until the light glows by the Cycle/Temp desired (Reg/Heavy, Perm Press, or Delicates).

2. Press SELECT

until the light glows below “Automatic” and by the desired Automatic dryness. (Change Options, if desired. See pages 13-l 4.)

PRESS

PRESS

0Select

YOU SEE

YOU .SEE‘;;. Automatic

qVWfBly More Dty Reg Dry

WDfY

Least Dry

3. Press START.

PRESS

 

0Start

Use Automatic drying to dry most loads

If you want to dry a load using a Timed setting, see “UsingTimed drying” on page 9.

lIf the load is drier than you like, select LESS DRY or LEAST DRY the next time you dry a similar load.

lIf the load is not as dry as you like, complete drying using a Timed setting. Select MORE DRY or VERY DRY the next time you dry a similar load.

NOTE: When you press Select, the Automatic dryness settings are selected first (starting with Reg Dry). Continue to press Select for a Timed setting (see page 9).

Automatic

.I#

-a-

VeryDry

More Dry

WI Dry

Less Dry cl Least Dry

8

Image 8
Contents Electronicgas and Electricdryers Your safety is important to us Thank you for buying a Whirlpool@ applianceSerial Number Dealer Purchase DateUnderstanding Safety What to do if YOU Smell GASImportant Safety Instructions Understanding your responsibilitiesUser Cards FeaturesOther features not shown Using the electronic touch controls Before starting your dryerThis Section One tone if the dryer accepts your selectionCydesITemps Stopping and restartingYour dryer Using Automatic drying Press SelectUsing Timed drying Until the light glows by the CycleITemp desiredPress ON/SELECT until the light glows by Selecting cycles/tempsTo select a different cycle/ temp Cycle chart Cotton and LlnensSee Warning on Fluff Air-No HeatRubber, Plastic or Heat Sensltlve items Using Your Options/Features Using Cycle Signal Finish Guard OptionsOption Selection Chart OptionsUsing the Lockout feature Understanding the Finish Guard cycleStatus Lights To lock/unlock control panelMaintenance-every load Cleaning the lint screenLint signal Caring For Your DryerMaintenance-as needed Cleaning a clogged lint screenCleaning the dryer interior Cleaning the dryer exteriorChanging the drum light ElectrIcal Shock and Fire HazardRemoving accumulated lint Electrical power Against side of dryer. Avoid disconnectingWire clips see View C or damaging wires Vacuum cleaner. Avoid damaging wiresBefore you dry ThisDrying tips SortingDrying special-care items Pillows, stuffed toysDlapers, baby clothes Elastic Items Vacation care Using dryer fabric softenersSaving energy Were Dried Llnt Lint screen is clogged Load Is properly Solving laundering problemsEnough Detergent Was used To Installation Instructions Lint screen Moisture in the load to beBelow 45F 7C Dryer Duct or outsideIs the dryer door firmly closed? If You Need Assistance Or ServiceBefore calling for assistance If you need service’ If you are not satisfied with how the problem was solved’ When asklng for help or servlce If you need assistanceFull ONE-YEAR WARRANlY From Date of Purchase Defective in materials or workmanship