Changing the drum light
(on some models)
The dryer light automatically turns on inside the dryer drum when you open the door.
Fire Hazard
Unplug dryer before changing light bulb.
Replace light bulb cover before operating dryer.
Failure to do so can result in death, fire, or electrical shock.
To change drum light:
1.Unplug the dryer or disconnect the elec- tricity leading to the dryer at the main power supply.
2.Open the dryer door. Remove the light bulb cover from the back wall of the dryer by turning the cover clockwise.
3.Remove the light bulb by turning it counterclockwise.
4.Replace the bulb with a
he light bulb cover and lock in place by turning counter- clockwise.
6.Reconnect power supply.
Vacation care
1.Unplug power supply cord or turn off electrical power supply.
2.Clean lint screen.
Saving energy
l Use an Automatic cycle to dry most loads. l Dry only full loads without overdrying.
l Avoid overloading dryer, adding wet items to a partly dried load, or opening the door unnecessarily.
l Plan your laundry to dry one load after another. A warm dryer shortens drying time.
l Shorten drying times by exhausting dryer properly and cleaning exhaust duct and outside exhaust hood as needed.
-Keep the lint screen clean.
-Use your dryer in a room where room air temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
21