Miele W 1113 operating instructions Cleaning the drain pump and lint trap, Open the access panel

Page 26

Washer care

Cleaning the drain pump and lint trap

Occasionally, small objects (buttons, coins, etc.) may become trapped in the lint trap. If the machine does not drain completely, the lint trap should be checked to ensure that it is free of foreign objects.

^Turn off the appliance with the "On / Off" button.

If the main drain hose is clogged, water will be retained in the machine (a maximum amount of 6.5 gal [25 l]).

,Caution: If laundry has been washed at a high temperature, the water draining out of the machine will still be hot! Allow it to cool before proceeding.

^To clean the lint trap, remove the tool from behind the detergent dispenser drawer.

^ Open the access panel.

26

^Turn the lint trap lid counterclockwise. Do not remove it. About 2 quarts of water will drain out of the hose.

If additional water remains in the machine, tighten the lint trap lid and empty the container. Repeat this procedure as often as necessary.

Image 26
Contents Operating instructions Washer 1113 Contents Contents Important Safety Instructions Guide to the washer Control panelBefore using for the first time General tips Using the washerPrepare and sort the laundry Load the laundry Select a program Close the drum doorProgram guide Silk Temperatures Fabric Spin Laundry Care Speed Symbol WoolensCold Med HandwashSelect wash options if needed Select the temperature and spin speed To start the final spin Special spin options HoldNo spin To finish the programToo much detergent may cause Add detergentToo little detergent may cause Detergent Liquid detergent insertNormal soiling Water hardnessWater softener Heavy soilingFabric softener Starch Do not exceed the maximum fill levelStart the program Select Delay Start if neededCanceling Delay Start Activate the program lock if necessaryRemove the laundry Interrupting a program Canceling a programMaking changes to the program Adding / removing laundry during a wash program Drum door cannot be opened ifLocking the washer Electronic program lockWasher care Cleaning the washerCleaning the drum Cleaning the detergent drawer Cleaning the drain pump and lint trap Open the access panelQuick Guide Remove this guide for easy referenceLoad the laundry Quick GuideSort the laundry Select a programAdd detergent Select the temperature and spin speedSelect Delay Start if needed Start the programNormal Options Washer care Cleaning the filter in the inlet valve Cleaning the water inlet filtersCleaning the inlet hose filter Changing the light bulb Frequently asked questions Wash program cannot be startedProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Opening the drum door during a power failure Remove the toolOptional accessories Technical ServicePC Update RepairsInstallation Instructions Disposal of an appliance Help protect our environmentDisposal of the packing material Installation Front viewBack view Installation site Do not lift the washer by the drum door InstallationRemove the shipping struts Installation Pull out the shipping strutInstalling the shipping struts Adjust the four leveling feet Level the washerInstallation beneath a counter Washer stand with drawer Reinstallation of the machine lid Washer / Dryer StackHose extension optional accessory PlumbingTips for a hot water connection Water connectionDo not connect the washer to hot water only Drainage Electrical connection Grounding InstructionsAlterations rights reserved / 2106 / with det insert
Related manuals
Manual 56 pages 23.56 Kb