Miele W 1113 operating instructions Program was interrupted and a fault message appears

Page 35

Frequently asked questions

The program was interrupted and a fault message appears.

Issue

Possible cause

Solution*

The buzzer sounds, and

The drain is blocked.

Clean the drain pump and

the "Drain" indicator

 

lint trap. See "Washer care -

flashes.

 

Cleaning the drain pump

"- - -". appears in the

 

and lint trap".

display.

The drain hose is too

The maximum drain pump

 

high.

height should not exceed

 

 

4 ft. (1.2 m).

The buzzer sounds, and

The water intake is

Check to determine if:

the "Intake" indicator

blocked.

– the water valve is open.

flashes.

 

– the inlet hose is kinked.

"- - -". appears in the

 

The inlet hose filter is

Clean the filter under running

display.

dirty.

water and carefully remove

 

 

 

any large particles.

The buzzer sounds, and

There is a fault.

Call the Miele Service

the "Intake" and "Drain"

 

Department.

indicators flash.

 

 

"- - -". appears in the

 

 

display.

 

 

The buzzer sounds and

There is a fault.

Restart the program.

the "Soak" and "Rinse"

 

If the fault message appears

indicators flash. "- - -".

 

again, call Miele’s Technical

appears in the display.

 

Service Department.

*To turn off the fault message: Turn off the washer using the "On / Off" button.

31

Image 35
Contents Operating instructions Washer 1113 Contents Contents Important Safety Instructions Control panel Guide to the washerBefore using for the first time General tips Using the washerPrepare and sort the laundry Close the drum door Load the laundry Select a programProgram guide Handwash Temperatures Fabric Spin Laundry Care Speed Symbol WoolensCold Med SilkSelect wash options if needed Select the temperature and spin speed To finish the program Special spin options HoldNo spin To start the final spinToo much detergent may cause Add detergentToo little detergent may cause Liquid detergent insert DetergentHeavy soiling Water hardnessWater softener Normal soilingFabric softener Do not exceed the maximum fill level StarchActivate the program lock if necessary Select Delay Start if neededCanceling Delay Start Start the programRemove the laundry Interrupting a program Canceling a programMaking changes to the program Drum door cannot be opened if Adding / removing laundry during a wash programElectronic program lock Locking the washerWasher care Cleaning the washerCleaning the drum Cleaning the detergent drawer Open the access panel Cleaning the drain pump and lint trapRemove this guide for easy reference Quick GuideSelect a program Quick GuideSort the laundry Load the laundryStart the program Select the temperature and spin speedSelect Delay Start if needed Add detergentNormal Options Washer care Cleaning the filter in the inlet valve Cleaning the water inlet filtersCleaning the inlet hose filter Changing the light bulb Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Opening the drum door during a power failureRepairs Technical ServicePC Update Optional accessoriesInstallation Instructions Disposal of an appliance Help protect our environmentDisposal of the packing material Front view InstallationBack view Installation site Do not lift the washer by the drum door InstallationRemove the shipping struts Pull out the shipping strut InstallationInstalling the shipping struts Level the washer Adjust the four leveling feetInstallation beneath a counter Washer stand with drawer Washer / Dryer Stack Reinstallation of the machine lidPlumbing Hose extension optional accessoryTips for a hot water connection Water connectionDo not connect the washer to hot water only Drainage Grounding Instructions Electrical connectionAlterations rights reserved / 2106 / with det insert
Related manuals
Manual 56 pages 23.56 Kb