Miele W 1903 instruction manual Programmable options, Then

Page 23

	Programmable options
Step 3:	additiona options
	A High water level
	(Only in “Cottons”
	rinse cycles)
Set the
Programme
selector to:
“Quick Wash”
or
“Drain”	additiona options
	B5th rinse in
	“Cottons” programme

or

“Woollens cold”	additiona options
	C Programme Lock
	(Child safety feature)

Step 4:		Press the “Water plus” button twice (i.e. in and out once)


Then:	The “Rinse/Rinse & hold” LED will light up


Step 5:		To store the option: press the “ON/OFF” button

23

Image 23

Contents For washing machine W Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of your old machine Help protect our environmentDisposal of the packing ma- terial Economy Economical usageWater hardness reminder Before using for the first timeLoading the machine Preparing the laundrySort the laundry Pre-treating the laundryTextile care symbols Too much detergent can result Adding detergentFor small loads Too little detergent can resultStarch Adding fabric softenerCottons ProgrammesShort run time 50 min Permanent PressMax load Kg 4.5 lbs Max spin 900 rpm Normal run time Delicates Max load 1.0 kg 2.2 lbs Max spin 900 rpm Run time 48 min WoollensQuick Wash 40C SpinDrain Additional options Changing the programme sequence After washing End of Programme5th Rinse in the Cottons programme Programme Lock Child safety featureProgrammable options High water level only in Cottons rinsesTo activate the additional options StepThen Programmable optionsDeleting the additional op- tions Cleaning the detergent drawer User Maintenance Instructions Cleaning and CareCleaning the washing machine Cleaning the drain pump and lint trap Cleaning and CareCleaning and Care To clean the filter in the inlet valve Cleaning the water inlet filterTo clean the filter in the inlet hose Check q warning lamp flashes Problem solving guideOn indicator lamp does not light up Selected programme does not beginPre-wash indicator lamp flashes Grey, greasy particles cling to washed laundry Excessive build-up of foamLime deposits are visible on the surface of the drum Pilling is evident on the fabricsLaundry washed with liquid detergent is not clean Laundry is too wet or the machine does not spin at all Opening the drum door in the event of a power failureMachine shakes during the spin cycle After sales service Removing the transport struts Installation Instructions InstallationInstallation surface InstallationWasher-Dryer stack InstallationLevelling the machine Electrical Connection Grounding instructions and Electrical connectionGrounding Instructions Double Receptacle Connection to the drain sys- tem PlumbingDimensions Technical dataTechnical data

Related manuals

Manual 44 pages 63.96 Kb