Miele W 1903 instruction manual After sales service

Page 34

After sales service

If problems occur that cannot be easily repaired, or if the appliance is under warranty, please contact:

Your Miele Dealer or

The Miele Service Department (see back cover).

When contacting the Service Depart- ment, please have the Model and Ser- ial numbers of your appliance avail- able, both which can be found on the dataplate visible above front glass, on the inside of the door.

Specimen:

34

Image 34
Contents For washing machine W Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of the packing ma- terial Help protect our environmentDisposal of your old machine Economical usage EconomyBefore using for the first time Water hardness reminderPre-treating the laundry Preparing the laundrySort the laundry Loading the machineTextile care symbols Too little detergent can result Adding detergentFor small loads Too much detergent can resultAdding fabric softener StarchProgrammes CottonsMax load Kg 4.5 lbs Max spin 900 rpm Normal run time Permanent PressShort run time 50 min Delicates Woollens Max load 1.0 kg 2.2 lbs Max spin 900 rpm Run time 48 minDrain SpinQuick Wash 40C Additional options Changing the programme sequence End of Programme After washingHigh water level only in Cottons rinses Programme Lock Child safety featureProgrammable options 5th Rinse in the Cottons programmeStep To activate the additional optionsProgrammable options ThenDeleting the additional op- tions Cleaning the washing machine User Maintenance Instructions Cleaning and CareCleaning the detergent drawer Cleaning and Care Cleaning the drain pump and lint trapCleaning and Care To clean the filter in the inlet hose Cleaning the water inlet filterTo clean the filter in the inlet valve Selected programme does not begin Problem solving guideOn indicator lamp does not light up Check q warning lamp flashesPre-wash indicator lamp flashes Pilling is evident on the fabrics Excessive build-up of foamLime deposits are visible on the surface of the drum Grey, greasy particles cling to washed laundryLaundry washed with liquid detergent is not clean Machine shakes during the spin cycle Opening the drum door in the event of a power failureLaundry is too wet or the machine does not spin at all After sales service Installation Installation Instructions InstallationInstallation surface Removing the transport strutsInstallation Washer-Dryer stackLevelling the machine Grounding Instructions Grounding instructions and Electrical connectionElectrical Connection Double Receptacle Plumbing Connection to the drain sys- temTechnical data DimensionsTechnical data
Related manuals
Manual 44 pages 63.96 Kb