Miele W 1903 instruction manual Installation, Washer-Dryer stack

Page 36

Installation

Turn the the right-hand transport strut 90° clockwise.

chine moved. Reinstallation can be carried out by reversing the procedure.

Withdraw the two struts together with the support plate.

Plug the two holes with the plastic caps provided.

The machine should not be moved with- out the transit struts in place.

The transit fitting should be stored in a safe place for future use. It must be reinstalled before the ma-

Washer-Dryer stack

A Miele tumble dryer can be stacked on top of this washing machine. A stacking kit* can be purchased from the Miele Parts Department.

All parts marked * are available from the Miele Parts Department.

36

Image 36

Contents For washing machine W Contents Guide to the machine Detergent dispenser drawer Important safety instructions Help protect our environment Disposal of the packing ma- terialDisposal of your old machine Economical usage EconomyBefore using for the first time Water hardness reminderPreparing the laundry Sort the laundryPre-treating the laundry Loading the machineTextile care symbols Adding detergent For small loadsToo little detergent can result Too much detergent can resultAdding fabric softener StarchProgrammes CottonsPermanent Press Max load Kg 4.5 lbs Max spin 900 rpm Normal run timeShort run time 50 min Delicates Woollens Max load 1.0 kg 2.2 lbs Max spin 900 rpm Run time 48 minSpin DrainQuick Wash 40C Additional options Changing the programme sequence End of Programme After washingProgramme Lock Child safety feature Programmable optionsHigh water level only in Cottons rinses 5th Rinse in the Cottons programmeStep To activate the additional optionsProgrammable options ThenDeleting the additional op- tions User Maintenance Instructions Cleaning and Care Cleaning the washing machineCleaning the detergent drawer Cleaning and Care Cleaning the drain pump and lint trapCleaning and Care Cleaning the water inlet filter To clean the filter in the inlet hoseTo clean the filter in the inlet valve Problem solving guide On indicator lamp does not light upSelected programme does not begin Check q warning lamp flashesPre-wash indicator lamp flashes Excessive build-up of foam Lime deposits are visible on the surface of the drumPilling is evident on the fabrics Grey, greasy particles cling to washed laundryLaundry washed with liquid detergent is not clean Opening the drum door in the event of a power failure Machine shakes during the spin cycleLaundry is too wet or the machine does not spin at all After sales service Installation Instructions Installation Installation surfaceInstallation Removing the transport strutsInstallation Washer-Dryer stackLevelling the machine Grounding instructions and Electrical connection Grounding InstructionsElectrical Connection Double Receptacle Plumbing Connection to the drain sys- temTechnical data DimensionsTechnical data

Related manuals

Manual 44 pages 63.96 Kb