Changing the programme sequence
Selecting a programme
A programme can only be started when:
The machine is turned on.
The drum door is properly shut.
The programme selector switch is at the “Start/Finish” position.
Turn the programme selector switch to the desired programme to begin.
To cancel a programme:
Turn the programme selector switch to the “Start/Finish” position.
To interrupt a programme:
Turn the machine off. To
To change an incorrectly se- lected programme:
Turn the programme selector switch to “Start/Finish”. When only the “On” LED is illuminated, a new pro- gramme can be selected.
To change a programme where the child safety option has been set, see page 19.
During operation, it is possible to:
–omit one or more programme stages
or
–repeat one or more programme stages.
To omit a programme stage:
A programme stage must first be reached to be omitted. When the PRO- GRAMME SEQUENCE indicator lamp indicates the stage to be omitted:
Turn the programme selector to “Start/Finish”.
As soon as the PROGRAMME SE- QUENCE indicator lamp for the stage at which you wish to continue starts flashing:
turn the programme selector switch to the appropriate programme.
To repeat a programme stage:
A programme stage must have finished before it can be repeated. When the PROGRAMME SEQUENCE indicator lamp indicates the stage after the one to be repeated:
Turn the programme selector switch to “Start/Finish”.
When only the “On” LED is illuminated:
select a programme.
After approx. 5 seconds, turn the pro- gramme selector switch back to “Start/Finish”.
Once the PROGRAMME SEQUENCE in- dicator lamp of stage you wish to re- peat starts flashing:
turn the programme selector switch to the desired programme within a period of 3 seconds.
19