Miele T8003 What if the program runs too long or stops?, What if the laundry is not dry enough?

Page 23

Frequently asked questions

What if the "Filter/Vent" indicator lights after cleaning the exhaust system?

Possible fault	Fix
The dryer is not operating efficiently	Check the exhaust length and diameter
because the duct hose is too long.	(see "How to calculate the effective
	duct length"). A long exhaust hose will
	increase program times and energy
	consumption.
	If the exhaust hose cannot be
	shortened, the indicator can be turned
	off by a service technician.

What if the program runs too long or stops?

Possible fault	Fix

The airflow is insufficient in the area of	Open a window or door to increase
the dryer.	airflow.

The lint filters are clogged.	Clean the lint filters (see "Dryer care").

The laundry was not spun sufficiently in	Select a higher spin speed in the wash
the washer.	program.

The dryer is overloaded.	Reduce the load size.

Metal zippers interfere with the dryer’s	Select a timed program to avoid
moisture sensors.	overdrying.

An airflow gap of 3/8" (10 mm) must be	This gap must not be blocked by a
provided between the machine and the	toekick or thick piled carpets for
floor.	sufficient airflow.

What if the laundry is not dry enough?

Possible fault

The load contained too many dissimilar items (size and fabric.)

What if water has collected around the drum opening?

Possible fault

This is condensed moisture from the laundry.

19

Image 23

Contents Page Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Program When to useGentle Select a drying option if neededTurbo Full loadSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filtersCleaning the grille filters Cleaning the drum Cleaning the exterior and the control panelChanging the light bulb How do I prevent static cling? Frequently asked questionsWhat if the Filter/Vent fault indicator is lit? What if the dryer will not run?Quick Guide Select a drying option if desired Quick GuideTurn on the dryer and load the laundry Select a programAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program For uniform loads, e.g. sheets Underwear, socks What if water has collected around the drum opening? What if the program runs too long or stops?What if the laundry is not dry enough? MieleCare After sales servicePC Update RepairsInstallation Instructions Important Safety Instructions Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Installation Rear view InstallationInstallation site Transporting the dryer to the installation siteReinstallation of the machine lid Installation beneath a counterChanging the position of the exhaust connection Leveling the dryerDetermining the position of the exhaust connection Installation tips Wall connection with rigid pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthWall vent or window vent Smooth metal ductElbow 90 sharp Concertina bendTotal duct length Disposal of an appliance Caring for the environmentDisposal of the packing materials All rights reserved