Miele T8002, T8005, T8003 installation instructions Installation tips

Page 33

Installation

Installation tips

An airflow gap of 3/8" (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toekick or thick piled carpets.

Do not install the dryer next to a refrigerator. The warm air exhausting from the dryer can affect the thermostat of the refrigerator, causing it to run continuously.

29

Image 33

Contents Page Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Program When to useTurbo Select a drying option if neededFull load GentleTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filtersCleaning the grille filters Cleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the Filter/Vent fault indicator is lit? Frequently asked questionsWhat if the dryer will not run? How do I prevent static cling?Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if desiredSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks What if the program runs too long or stops? What if the laundry is not dry enough?What if water has collected around the drum opening? PC Update After sales serviceRepairs MieleCareInstallation Instructions Important Safety Instructions Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Installation Installation site InstallationTransporting the dryer to the installation site Rear viewReinstallation of the machine lid Installation beneath a counterLeveling the dryer Determining the position of the exhaust connectionChanging the position of the exhaust connection Installation tips Wall connection with rigid pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthElbow 90 sharp Smooth metal ductConcertina bend Wall vent or window ventTotal duct length Caring for the environment Disposal of the packing materialsDisposal of an appliance All rights reserved