Installation
Installation beneath a counter
,When removing the machine lid to reduce the height of the machine, a built under spacer kit* is necessary.
It must be installed by a Miele Service Technician.
The cover plate of the built under kit replaces the appliance lid and ensures electrical safety.
An installation manual is supplied with the
The electrical connection should be near the dryer and accessible at all times.
Provide necessary space for the ducting when planning the undercounter installation.
Extended machine feet* are recommended at a
^Set the extended machine feet at a height of 1 9/16" (40 mm).
Remove the original machine feet and replace them with the extended ones.
One or two filler frames* are
recommended at a niche height of 34 1/4" to 34 13/16" or 36" to 36 5/8"
* (optional accessory)
An existing continuous toe kick must be interrupted at the dryer location!
Reinstallation of the machine lid
^When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for safe transport of the dryer.
27