Miele T8003, T8002, T8005 installation instructions Important Safety Instructions

Page 26

IMPORTANT SAFETY INSTRUCTIONS

Installation, repair and maintenance work should be

performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty.

Before installation, disconnect the tumble dryer from the electrical

supply by shutting off the power main, unplugging the power cord or tripping the circuit breaker. Do not restore power until the installation is complete.

GROUNDING INSTRUCTIONS This appliance must be grounded.

In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment grounding

conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance! If it will not fit

the outlet, have a proper outlet installed by a qualified electrician.

This dryer must be vented outdoors to reduce the risk of fire.

Be sure to observe local building codes.

Use flexible or rigid metal pipe for venting. Non-metallic flexible hose should not be used, it is a potential fire

hazard.

The dryer exhaust must not be connected to a chimney, ducting

which ventilates rooms with fireplaces, a combustion appliance vent flue, a wall, ceiling or concealed space of a building.

If there is any doubt concerning installation, contact Miele’s

Technical Service Department.

22

Image 26
Contents Page Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsSelect a program Using the dryerTurn on the dryer and load the laundry Program When to use Extra DryFull load Select a drying option if neededTurbo GentleSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filters Dryer careCleaning the grille filters Cleaning the exterior and the control panel Cleaning the drumChanging the light bulb What if the dryer will not run? Frequently asked questionsWhat if the Filter/Vent fault indicator is lit? How do I prevent static cling?Quick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if desiredAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program For uniform loads, e.g. sheets Underwear, socks What if water has collected around the drum opening? What if the program runs too long or stops?What if the laundry is not dry enough? Repairs After sales servicePC Update MieleCareInstallation Instructions Important Safety Instructions Height of vent adapter in a stacked installation Washer / Dryer StackElectrical connection Installation Transporting the dryer to the installation site InstallationInstallation site Rear viewInstallation beneath a counter Reinstallation of the machine lidChanging the position of the exhaust connection Leveling the dryerDetermining the position of the exhaust connection Installation tips Window connection Wall connection with rigid pipeDirect wall connection Dryer top viewHow to calculate the effective duct length Tips about the ductworkConcertina bend Smooth metal ductElbow 90 sharp Wall vent or window ventTotal duct length Disposal of an appliance Caring for the environmentDisposal of the packing materials All rights reserved