Miele T8005, T8002, T8003 Window connection, Wall connection with rigid pipe

Page 34

Installation

Exhaust connection with a flexible exhaust hose or rigid pipe

Using the connector supplied, an exhaust hose (4" [100 mm] diameter) can be installed.

Necessary materials:

–a wall or window duct (available from Miele)

–an exhaust hose made of approved non-flammable material

^Install the exhaust hose or pipe, 2, with the connector, 1, to the dryer.

Window connection

1Window duct ( (installed in a plexiglass pane)

2Connector for the flexible exhaust hose

Wall connection with rigid pipe

1Wall pipe (Installation sheet supplied with the Miele wall pipe)

2Connector

3Rigid pipe

30

Image 34

Contents Page Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsTurn on the dryer and load the laundry Using the dryerSelect a program Program When to use Extra DryFull load Select a drying option if neededTurbo GentleSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filters Dryer careCleaning the grille filters Cleaning the exterior and the control panel Cleaning the drumChanging the light bulb What if the dryer will not run? Frequently asked questionsWhat if the Filter/Vent fault indicator is lit? How do I prevent static cling?Quick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if desiredSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program For uniform loads, e.g. sheets Underwear, socks What if the laundry is not dry enough? What if the program runs too long or stops?What if water has collected around the drum opening? Repairs After sales servicePC Update MieleCareInstallation Instructions Important Safety Instructions Height of vent adapter in a stacked installation Washer / Dryer StackElectrical connection Installation Transporting the dryer to the installation site InstallationInstallation site Rear viewInstallation beneath a counter Reinstallation of the machine lidDetermining the position of the exhaust connection Leveling the dryerChanging the position of the exhaust connection Installation tips Window connection Wall connection with rigid pipeDirect wall connection Dryer top viewHow to calculate the effective duct length Tips about the ductworkConcertina bend Smooth metal ductElbow 90 sharp Wall vent or window ventTotal duct length Disposal of the packing materials Caring for the environmentDisposal of an appliance All rights reserved