Miele T8005, T8002, T8003 Cleaning the exterior and the control panel, Cleaning the drum

Page 16

Dryer care

Cleaning the exterior and the control panel

,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance.

Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface.

^The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.

^Wipe dry.

Cleaning the drum

^The stainless steel surfaces of the drum can be cleaned using a non-abrasive stainless steel cleaner.

^Wipe clean with a soft cloth.

16

Image 16

Contents Page Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsTurn on the dryer and load the laundry Using the dryerSelect a program Program When to use Extra DrySelect a drying option if needed TurboFull load GentleSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programChild lock Child lockTo activate the child lock To deactivate the child lockCleaning the lint filters Dryer careCleaning the grille filters Cleaning the exterior and the control panel Cleaning the drumChanging the light bulb Frequently asked questions What if the Filter/Vent fault indicator is lit?What if the dryer will not run? How do I prevent static cling?Quick Guide Quick Guide Turn on the dryer and load the laundrySelect a program Select a drying option if desiredSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program For uniform loads, e.g. sheets Underwear, socks What if the laundry is not dry enough? What if the program runs too long or stops?What if water has collected around the drum opening? After sales service PC UpdateRepairs MieleCareInstallation Instructions Important Safety Instructions Height of vent adapter in a stacked installation Washer / Dryer StackElectrical connection Installation Installation Installation siteTransporting the dryer to the installation site Rear viewInstallation beneath a counter Reinstallation of the machine lidDetermining the position of the exhaust connection Leveling the dryerChanging the position of the exhaust connection Installation tips Window connection Wall connection with rigid pipeDirect wall connection Dryer top viewHow to calculate the effective duct length Tips about the ductworkSmooth metal duct Elbow 90 sharpConcertina bend Wall vent or window ventTotal duct length Disposal of the packing materials Caring for the environmentDisposal of an appliance All rights reserved