Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change
Fax +32 2 359 95 50 the page numbering. Keep the language integrity. Print only what is inside the frame.
•When changing the setting from a higher selection to a lower setting allow several minutes for the pressing plate to cool sufficiently after making the change.
Kind of textile | Temperature | Steam |
Nylon | 100°C / 212°F | NO |
Silk | 130°C / 266°F | NO |
Rayon | 140°C / 284°F | NO |
Wool | 160°C / 320°F | YES |
Cotton | 200°C / 392°F | YES |
Linen | 210°C / 410°F | YES |
NOTE: You may find it more efficient to arrange your fabrics from those requiring the lowest setting to those requiring the highest setting and proceed accordingly. This will avoid any unnecessary delay or wait for the pressing plate to cool.
STEAM CONTROL
•Steam is produced only when the yellow steam ready light is on.
•The green ready light goes off when the unit has reached the desired temperature. The yellow steam ready light will come on when the unit is ready to produce steam.
•If this is the first time you are using the steam press or you have been storing it for some time, lift the pressing plate into the raised position and press the burst of steam button several times until the steam begins to flow.
•The burst of steam function can only be used when the steam ready light is on AND the steam press is in a slightly opened position. Do not use the burn of steam function when the steam press is closed, or you may damage the unit.
•Do not press the burst of steam button for more than 5 seconds or water may drip on your garment.
6 | USK STP 20159 - 110127 |