840159500 Ev02.qxd 4/2/07 2:28 PM Page 4
Using Your Iron
To Dry Iron
1.Plug in iron.
2.Turn Steam ON/OFF Lever to the
Dry Iron 
position.
3.Set Fabric Setting Indicator to desired temperature. Allow the iron to heat until the indicator box around the selected fabric stops blinking.
4.To turn iron off, set Fabric Setting Indicator to OFF and unplug iron. The iron may be turned off by press- ing the Temperature Selector button for 3 seconds.
To Steam Iron
1.Unplug iron. Turn Steam ON/OFF
Lever to the Dry Iron 
position. Set iron upright on heel rest. Using a cup, slowly pour tap water into the water tank opening until MAX fill line is reached.
2.Plug in iron.
3.Press Temperature Selector. With iron in an upright position, set Fabric Setting Indicator to desired setting in the steam range (see chart on page
6). Allow the iron to heat until the indi- cator box around the selected fabric stops blinking. Do not preheat the iron with the soleplate facing down.
4.Set Steam ON/OFF Lever to steam.
5.To turn iron off, turn Steam ON/OFF
Lever to Dry Iron 
. Press Temperature Selector. Set Fabric Setting Indicator to OFF and unplug iron. The iron may be turned off by pressing the Temperature Selector button for 3 seconds.
6.Empty water from the iron following directions in “Caring for Your Iron and Soleplate.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
Features (on select models)
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast
|
| of steam. Push |
|
| Spray Button to |
|
| release a fine |
|
| spray of water |
|
| for difficult wrin- |
Blast | Spray | kles in cotton or |
|
| linen. |
Quick Off
Press and hold the Temperature Selector for
3 seconds to
turn the iron off quickly.
Temperature
Selector
4