Euro-Pro EP480 warranty Water Spray, To Empty the Iron

Page 10

WATER SPRAY

•Use the spray button to add moisture to stubborn wrinkles.

•First make sure that there is water in the tank.

•Press the spray button (6) slowly to get a jet spray.

•Press the spray button strongly and quickly to get a mist.

•Please note: If spray does not come out when you press the spray button, cover the spray opening with your finger and press a few times.

TO EMPTY THE IRON

•Always empty iron after each usage.

•After using the iron, turn the variable steam control to ‘0’ and the temperature control dial to ‘minimum’.

•Unplug the iron from the power source.

•Set variable steam control to ‘MAX’.

•Open the water inlet cover and turn the iron up-side down over the sink with the tip pointing downward and allow the water to flow from the opening.

•Set variable steam control to ‘0’.

•Allow iron to cool on the iron rest before storing.

WARNING: Use caution when you turn the iron up-side down- there may be hot water in the reservoir. Burns can occur from touching hot metal parts, hot water or steam.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Watt Professional For Household USE only Special Instructions EURO-PROPROFESSIONAL Steam Iron Resetting After Auto Shut-Off Before First USE Choosing the Ironing Temperature Connecting the Iron to the Power SupplyFilling with Water Ironing with Steam Water Spray To Empty the IronSELF-CLEANING To ADD WaterCLEANING, Storage & Maintenance Iron Troubleshooting Iron may not be hot enough. Set thermostat to the ‘max’ Important Service Information Do not Return IT to the StoreONE Year Limited Warranty
Top Page Image Contents