Euro-Pro EP480 warranty To ADD Water, Self-Cleaning

Page 11

TO ADD WATER

•Unplug iron from the electrical outlet.

•Follow instructions to empty the iron.

•Then, follow the instructions for filling the iron.

Following this procedure will ensure that you do not overfill the iron.

SELF-CLEANING

In order to remove calcium and built-up particles, the self-cleaning system should be run at least once a month.

•Fill the watering beaker provided to the half-full mark and then pour into the water reservoir.

•Set the variable steam control (4) to the no steam position.

•Insert the main plug into the wall socket.

•Set the temperature control dial (9) to the maximum temperature.

•Wait until the thermostat light (3) goes off and steam iron has reached preset temperature.

•Remove the plug from the wall socket.

•Hold the steam iron horizontally over a sink.

• Turn the variable steam control (4) to “Self-Clean ” position. Hot water and steam will be emitted from the soleplate. Swing the steam iron lightly back and forth gently to allow lime and dust particles to come out.

•When the water reservoir is empty, shift the variable steam control from “Self-Clean” position to “0”.

•Stand the iron upright and insert the plug into the wall socket to let the iron heat up again.

•Move the iron over a clean cotton cloth to clean the soleplate and let the remaining water on the soleplate evaporate.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Watt Professional For Household USE only Special Instructions EURO-PROPROFESSIONAL Steam Iron Resetting After Auto Shut-Off Before First USE Connecting the Iron to the Power Supply Choosing the Ironing TemperatureFilling with Water Ironing with Steam To Empty the Iron Water SprayTo ADD Water SELF-CLEANINGCLEANING, Storage & Maintenance Iron Troubleshooting Iron may not be hot enough. Set thermostat to the ‘max’ Do not Return IT to the Store Important Service InformationONE Year Limited Warranty
Top Page Image Contents