Euro-Pro EP480 warranty Iron may not be hot enough. Set thermostat to the ‘max’

Iron Troubleshooting (continued)

Problem	Potential Reasons & Solutions
Water droplets coming from steam vents	• Iron may not be hot enough. Set thermostat to the ‘max’
	position. Always allow iron sufficient time to heat up
	(thermostat light goes off) before activating the variable
	steam control.
	• Auto-Off may be activated. Move iron or gently shake.
	• Overuse of steam burst. Allow more time between each
	burst.
	• Iron may have been overfilled. Turn iron off, empty water
	and follow instructions for filling.
	• Steam performance may be low if iron requires
	seasoning. Use regular tap water for 1or 2 tanks until
	steam performance improves.

14