Before First USE

•Remove any labels, stickers or tags which may be attached to the body or soleplate of the iron before using the iron.

•Read all instructions for use carefully.

•Always follow the Important Safeguards.

IMPORTANT

The first time an iron is used, some odor and small white particles may come out of the steam vents. This is perfectly normal and will cease to occur after the iron has been in use for a short while.

Before you start using your iron, follow the instructions in the manual and do the following in order to eliminate any odor and small white residue particles and to ensure optimum steam performance.

•Fill the iron with regular tap water.

•Set the temperature control dial at its highest and steam control at ‘0’.

•When the thermostat light goes off to indicate that the iron has reached the selected temperature, set the steam control at MAX.

•Keep the iron in a horizontal position and allow it to steam until the water runs out.

•Press the steam burst button to eliminate white residue particles.

•Repeat this procedure through 2 or 3 fillings of water.