English
•Set the temperature control dial to the min position before plugging in or out.
•Let the appliance cool down before leaving it unattended and before cleaning or inspecting any parts of the appliance.
•The power supply cord should not touch the hot soleplate during use or during the cool down period.
•Do not touch the soleplate until it has cooled down.
•Wait until the appliance has cooled down before emptying the water tank as the water may still be hot.
•Always diconnect the appliance from the supply before filling, emptying, cleaning, or carying out any maintenance on the appliance.
•The iron must be used and rested on a stable surface
•The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking
Features
1.Spray button
2.Steam control dial
3.Steam burst button
4.Temperature control dial
5.Heating light
6.Heel rest
7.
8.Cord storage
9.Maximum filling level indicator
10.Water tank
11.Soleplate
12.Water tank cover
13.Spray nozzle
Before first use
Cleaning the soleplate
•Make sure that the appliance is unplugged.
•Fill the appliance with water as described below.
•Use the
Some parts of the appliance have been lightly greased and as a result the appliance may smoke slightly when switched on for the first time. This will cease after a short while.
Assembly
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
Filling the water tank (Fig. B)
In order to be able to use the steam function or the spray feature, you will first need to fill the water tank with water.
•Make sure that the appliance is unplugged.
•Open the water tank cover (12).
•Hold the appliance at an angle as shown.
•Fill the appliance with water using the beaker provided.
•Close the water tank cover.