English
Using the spray button
The spray feature can be used at any temperature setting when either steam or dry ironing.
•Make sure that there is water in the tank.
•Press the button (1) several times to activate the pump while you are ironing.
Using the self-clean button
The
•Fill the tank (10) to the maximum filling level (9).
•Set the temperature control dial (4) to the max position.
•Plug the appliance in and switch on.
•Allow the appliance to heat up until the heating light (5) switches off and then on again.
•Unplug the appliance and hold it horizontally over the sink.
•Press the
Hot water and steam will come out of the vents. Impurities and scale will be washed away.
•Move the iron backwards and forwards while this is happening.
•Release the
•Stand the appliance upright on its heel.
•Plug the appliance in and switch on.
•Iron an old cloth or towel to dry the soleplate.
Hints for optimum use
•Sort the articles to be ironed according to the fabric. Start ironing with the fabrics requiring the lowest heat setting.
•The appliance can be used as a dry iron even if there is water in the tank. Do not fill the tank with water if the appliance is to be used as a dry iron for an extended period.
•Avoid ironing over zippers, rivets on jeans etc. as they will scratch the soleplate.
Cleaning and storage
Warning! Before cleaning and storing, unplug the appliance and allow it to cool down.
•Pour out any remaining water after each use by tilting the appliance forward.
•Clean the body with a soft damp cloth.
•Wipe scale and other residues off the soleplate with a damp cloth.
•Store in an upright position. The cord can be wound around the cord storage
(8).
Technical Data
|
| X810 | X750 |
|
|
|
|
Voltage | V | ||
|
|
|
|
Power input | W | 1800 | 1400 |
|
|
|
|
Weight | kg | 1.54 | 1.54 |
|
|
|
|