English
Warning! Never fill above the maximum filling level (9). Normal tap water can be used, but if you live in a hard water area the use of distilled water is recommended.
•Do not use chemically descaled water.
Use
Warning! Do not leave the appliance unattended while it is connected to the power supply and during the cool down period.
Temperature setting
The required temperature setting depends on the garment fabric.
•Adjust the temperature control dial (4) to the required setting:
1 Silk / Nylon
2 Acctate / Acrylic
3 Polyester / Rayan
4 Cotton / Blends
5 Wool
6 Cotton
7 Linen
•If you are unsure of the fibre content of a garment, start with a low temperature setting and test on a small area (seam or inside hem). If wrinkles remain, gradually increase the heat setting until you find the optimum setting.
Using as a dry iron
•Stand the appliance on its heel rest (6).
•Plug the appliance in and switch on.
•Set the steam control dial (2) to the 'O' position.
•Adjust the temperature control dial (4) to the required setting.
The heating light (5) will switch off when the
appliance has reached the required
temperature.
Using as a steam iron
•Fill the water tank as described above.
•Stand the appliance on its heel rest (6).
•Plug the appliance in and switch on.
•Adjust the temperature control dial (4) to the required steam setting.
The heating light (5) will switch on. When
the heating light switches off, the iron will
be ready for use as a steam iron. The
heating light will regularly switch on and off
whilst ironing.
•To create steam, set the steam control dial (2) to the required steam position.
Using the steam burst button
The steam burst feature can only be used
whilst ironing on a high temperature setting.
•Make sure that there is water in the tank and the temperature control dial (4) is set to the steam position.
•Lift the appliance and press the steam burst button (3). You may need to press a few times to activate the pump.