USING THE COMPACT FABRIC STEAMER
STEAMING LINENS & FABRICS
NOTE: Be sure that Water Reservoir has already been filled before following these steps. Also be sure that Rubber Accessory Housing is connected along with the Fabric Brush or Lint Remover, to reduce excesive water spitting from the Steam Nozzle.
1.Plug grounded power cord into a convenient electrical outlet. Heater Indicator Light will immediately illuminate to indicate that unit is heating up.
CAUTION: This unit uses a grounded
2.After approximately 2 minutes of heating time, unit will begin emitting steam.
3.Direct Steam Nozzle (and any attachments) towards material you wish to steam.
CAUTION: Always be sure that Steam Nozzle and any other attachments are pointed in a safe direction (away from yourself, other people, pets and plants) when steam is being emitted.
4.Keep the flow of steam focused on the material you are steaming. Using a slight
Steaming Tips:
-Curtains and draperies can be steamed while still hanging.
-To remove wrinkles from towels, handkerchiefs and napkins, drape them over a rod or towel rack and gently steam them.
-Heavier fabrics may require repeated steaming to achieve desired results.
-To remove exceptionally stubborn wrinkles, steam both sides of fabric.
STEAMING GARMENTS
1.Place garment on a clean,
2.Direct Steam Nozzle towards bottom of garment. Steam will rise along inside and outside of fabric, removing wrinkles. Slowly slide Steam Nozzle upward from bottom to top of garment.
3.Direct Steam Nozzle away from garment and smooth fabric with your free hand.
4.Repeat as necessary until garment is
When you are finished using the Compact Fabric Steamer, immediately unplug grounded power cord from electrical outlet. Refer to Care and Storage Guidelines on page 9 of this manual for proper cleaning and storage procedures.
8 | Top Innovations, Inc. |