Top Innovations SF-407 warranty Assembling the Telescopic Pole

ASSEMBLING THE FABRIC STEAMER

ASSEMBLING THE TELESCOPIC POLE

1.Screw Pole Extension (FIGURE 1-A) onto top section of Telescopic Pole (FIGURE 1-B). Rotate in a clockwise direction until tight and secure.

2.Place Pole Top onto top of Pole Extension as shown (FIGURE 2) and rotate in a clockwise direction until tight and secure.

3.Loosen top ridged knob (FIGURE 3-C) by turning it in a counter-clockwise direction. Pull top section of Telescopic Pole (FIGURE 3-E) upwards to extend it to full height. Re-tighten top ridged knob.

4.Loosen bottom ridged knob (FIGURE 3-D) by turning it in a counter-clockwise direction. Pull middle section of Telescopic Pole (FIGURE 3-F) upwards to extend it to full height. Re-tighten bottom ridged knob.

5.Telescopic Pole is now fully assembled and extended. To reduce Pole back to compact height, reverse steps 3 and 4.

NOTE: The Telescopic Pole must be fully extended during steamer operation in order to insure a free flow of steam through the Steam Hose.

FIGURE 1	FIGURE 2	FIGURE 3
	Top Innovations, Inc.	7