Top Innovations SF-407 warranty Attaching the Steam Hose

ASSEMBLING THE FABRIC STEAMER

ATTACHING THE STEAM HOSE

1.Place end of Steam Hose onto threaded Hose Base (FIGURE 7).

2.Rotate knob in clockwise direction until Steam Hose is tightly secured onto Hose Base (FIGURE 8). Hand tighten only. Do not over-tighten.

3.Hang Steam Nozzle on specially designed Steam Nozzle Holder (FIGURE 9).

FIGURE 7 FIGURE 8 FIGURE 9

CAUTION: To prevent steam from causing bodily injury or damage to surfaces, always hang the Steam Nozzle on the Steam Nozzle Holder when not in use.

Do not lay the Steam Hose on the floor as condensation may occur, causing unwanted water droplets in the steam.

Do not pull on the Steam Hose with excessive force as this may damage it, resulting in a steam leak.

Your new SF-407 Fabric Steamer is now fully assembled and ready for use. Please continue reading this manual for instructions on using the Fabric Steamer, as well as directions for cleaning and storage.

Top Innovations, Inc. 9