Technics SC-EH680 »B Setting the time, Press and hold -DEMO until no Demo is displayed, Press SET

A

sDEMO

DEMO

B

1 2 3

1

H/I

2

1 CLOCK/

TIMER

2SET

3

1? TUNING @

2SET

[A]Turning DEMO off

A demonstration of the display is shown if you have not set the clock.

You can reduce the power consumed in standby mode by turning the demonstration off.

While the unit is on:

Press and hold [–DEMO] until “NO DEMO” is displayed.

Each time you press and hold the button:

NO DEMO (off)bDEMO (on)

»B Setting the time

This is a 24-hour clock.

The example shows how to set the clock for 16:25 (4:25 p.m.).

1 Press [ê/I] to turn the unit on.

2 1 Press [CLOCK/TIMER] to display “CLOCK”.

Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^------------------------------------------------------------	}
2 Within 5 seconds		steps
Press [SET].
3 1 Press [TUNING (X or W)] to set the time.		preparatoryand
The time display can be changed in one minute units by tapping
the buttons, and quickly by holding down the buttons.
2 Press [SET].
The time is set and the original display is restored.
Displaying the clock		guide
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.		Control
Reset the clock regularly to maintain accuracy.

RQT6301

13