STEP3 Antennas
FM indoor antenna | For Australia and N.Z. |
Fix the other end of the antenna where reception is best.
Twist the vinyl tip and pull off.
Adhesive tape
AM indoor antenna
Twist the vinyl tip and pull off.
Simple set-up and play
Keep loose antenna cord away from other wires and cords.
STEP4 Flat cables and AC mains lead
Flat cables
Keep the cables as flat as possible against the back of the unit. Connect the connectors to the terminals of the same colour. Incorrect connection can damage the unit.
A1 | B2 |
|
Connecting
B1
Disconnecting
To household mains socket
AC mains lead 
(For the United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Insertion of connector | Appliance inlet |
| |
Even when the connector is perfectly in- | Connector |
serted, depending on the type of inlet |
|
used, the front part of the connector may |
|
jut out as shown in the drawing. |
|
However there is no problem using the unit. | Approx. 6 mm |
|
For your reference:
Information you enter into the unit’s memory, except for time, remains intact for up to two weeks after the mains lead is disconnected.
RQT6301
7