Technics SC-EH580, SC-EH780, SC-EH680 Recording CDs, »A Normal recording, »B One touch CD editing

1 2

	∫
EH780	3
EDIT

DISC1–5∫

EH680 EH580 EDIT 3

∫

A

1

∫

2	¥REC	ÎNR
	PAUSE	2
		REC
3
B	EH780	EH680 EH580
	EDIT	EDIT

2

REC

EDIT

Recording CDs

Preparation:

³Do the preparatory steps (á page 28).

³Insert the CD(s) you want to record (á page 8 or 9). ³[EH780]

Press [DISC, 1–5] on the CD changer to select the disc where you want to start recording, then press [º] to stop the disc.

»A Normal recording

1 Press ["] (reverse side) or [!] (forward side) then [º] to

set the tape direction.

2 Press [´ REC PAUSE].

The deck goes into the recording standby mode and the indicator “"” or “!” starts flashing.

3 Press [!] on the CD changer or CD player.

Recording starts automatically.

4 seconds after the CD(s) finishes, the deck goes into the recording stand- by mode.

To stop recording

EITHER

Press [º] on the CD changer or CD player.

The deck goes into the recording standby mode 4 seconds later.

OR

Press [º] on the deck.

Recording stops immediately but the CD continues to play.

To record programmed tracks

Program tracks before step 1 (á page 15).

»B One touch CD editing

This function makes it easier for you to record from discs.

³When recording, if a track is cut off in the middle at the end of the front side, it is recorded from the beginning on the reverse side. (Ensure the reverse mode “@” is selected. )

³At the end of the reverse side recording stops and the current track will be interrupted.

After pressing ["] or [!] then [º] on the cassette deck to set the tape direction,

Press [EDIT].

Recording starts. In the meantime, “CD EDIT” will scroll across the display. After edit-recording has finished, the cassette deck automatically stops.

To edit programmed tracks	operations
To stop editing
Press [º] on the CD changer or CD player.
The cassette deck also stops. “EDIT OUT” scrolls across the display.	Recording
Program the tracks (á page 15) and press [EDIT].

RQT6301

29