The cassette deck
Poor quality sound.
Recording is not possible.
“DECK NO TAPE” is displayed during “One touch editing” .
“DECK CHANGE TAPE” is displayed during “One touch editing”.
Clean the heads. W
Check the Dolby NR setting. C
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. L
Load a cassette into deck 2. L
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. L
When there is a television set nearby
The picture on the TV disappears or stripes appear on the screen.
The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna.
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the system.
The remote control
The remote control doesn’t work.
Check the batteries are inserted correctly. < Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
Maintenance | Cassette tape selection and care |
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
³Never use alcohol, paint thinner or benzine to clean this unit.
³Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).
The unit can correctly play or record on the following types. It identifies the type automatically.
Normal position/TYPE I | 4 |
High position/TYPE II | 4 |
Metal position/TYPE IV | 4 |
³Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
³Tape slack can get caught up in the mechanism and should be taken up before the tape is played.
³Endless tapes can get caught up in the deck’s moving parts if used incor- rectly. Use tapes appropriate to this unit’s
References
RQT6301
39