Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
use | This appliance is supplied with a moulded three pin mains | |
| ||
Before | plug for your safety and convenience. | |
A | ||
| ||
| Should the fuse need to be replaced please ensure that | |
| the replacement fuse has a rating of | |
| is approved by ASTA or BSI to BS1362. | |
| Check for the ASTA mark m or the BSI mark o on the | |
| body of the fuse. | |
| If the plug contains a removable fuse cover you must en- | |
| sure that it is refitted when the fuse is replaced. | |
| If you lose the fuse cover the plug must not be used until a | |
| replacement cover is obtained. | |
| A replacement fuse cover can be purchased from your | |
| local dealer. |
CAUTION!
IF THE FITTED MOULDED PLUG IS UN- SUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELEC- TRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
If a new plug is to be fitted please observe the wiring code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.
RQT6301
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL n OR COL-
OURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B | Fuse cover |
2.Replace the fuse and close or attach the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)