AEG L 70470 FL, L 70670 FL user manual Care and Cleaning

Page 22

22

CARE AND CLEANING

WARNING!

Disconnect the appliance from the mains supply before you clean it.

DESCALING

The water we use contains limescale. If it becomes necessary, use a water soft- ener to remove limescales.

Use a special product made for wash- ing machines. Obey the instructions that you find on the packaging of the manufacturer.

Do this separately from the laundry wash.

EXTERNAL CLEANING

Clean the appliance only with soap and warm water. Fully dry all the surfaces.

DOOR SEAL

CAUTION!

Do not use alcohol, solvents or chemical products.

MAINTENANCE WASH

With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a mainte- nance wash. To do this:

Empty the laundry from the drum.

Set the hottest cotton wash pro- gramme

Use a correct quantity of powder de-

tergent with biological properties. After each wash, keep the door open for a while to prevent mould and to let unpleasant smells go out.

Regularly examine the seal and remove all objects from the inner part.

DRUM

Regularly examine the drum to prevent limescale and rust particles.

Only use special products to remove rust particles from the drum.

To do this:

Clean the drum with special product for stainless steel.

Start a short programme for cotton at the maximum temperature with a small quantity of detergent.

Image 22
Contents FL L 70670 FL Contents ServiceFor Perfect Results Accessories and ConsumablesVisit OUR Website for Care and Cleaning Safety InformationGeneral Safety InstallationWater connection Discard the AppliancePackaging Materials Environment ConcernsTechnical Information Ecological HintsAccessories Product DescriptionDisplay Control PanelOn OFF Button Programme KnobSTART/PAUSE Button Delay Start Button Time Save Button Temperature ButtonAcoustic Signals Function Extra Rinse ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Consumption Values Programme Energy consumption Water consumpBefore First USE Using the ApplianceLoading the Laundry Filling the Detergent and Additives Check the position of the flapCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme AT the END of the Programme SET the Delay StartCancel the Delay Start Change a FunctionEnglish Stubborn Stains Hints and TipsLaundry Load Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpPage Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainageEnglish 132933910-A-312011