AEG L 70670 FL, L 70470 FL user manual Pull out the plastic spacers

Page 31

ENGLISH 31

6.Put one of the polystyrene packag- ing elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses.

7.Remove the polystyrene protection from the bottom.

8.Pull up the appliance in vertical po- sition.

9.Remove the power supply cable and the drain hose from the hose holders.

10.Remove the three bolts. Use the key supplied with the appliance.

11.Pull out the plastic spacers.

Image 31

Contents FL L 70670 FL Service ContentsFor Perfect Results Accessories and ConsumablesVisit OUR Website for Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionEcological Hints Environment ConcernsTechnical Information Packaging MaterialsProduct Description AccessoriesProgramme Knob Control PanelOn OFF Button DisplaySTART/PAUSE Button Delay Start Button Extra Rinse Button Temperature ButtonAcoustic Signals Function Time Save ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesBefore First USE Using the ApplianceLoading the Laundry Check the position of the flap Filling the Detergent and AdditivesCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammeEnglish Detergents and Additives Hints and TipsLaundry Load Stubborn StainsWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132933910-A-312011