AEG L 70670 FL, L 70470 FL user manual Detergent Dispenser, Drain Pump

Page 23

ENGLISH 23

DETERGENT DISPENSER

To clean the dispenser:

1

1.

Press the lever.

2.

Pull the dispenser out.

 

 

2

 

3. Remove the top part of the liquid additive compartment.

4. Clean all the parts with water.

5. Clean the dispenser recess with a brush.

6. Put back the dispenser in the re- cess.

DRAIN PUMP

Regularly examine the drain pump and make sure that it is clean.

Clean the pump if:

The appliance does not drain the wa- ter.

The drum cannot turn.

The appliance makes an unusual noise because of the blockage of the drain pump.

The display shows an alarm code be- cause of the problem with water drain.

WARNING!

1.Disconnect the mains plug from the mains socket.

2.Do not remove the filter while the appliance oper- ates. Do not clean the drain pump if the water in the ap- pliance is hot. The water must be cold before you clean the drain pump.

Image 23
Contents FL L 70670 FL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionEcological Hints Environment ConcernsTechnical Information Packaging MaterialsProduct Description AccessoriesProgramme Knob Control PanelOn OFF Button DisplaySTART/PAUSE Button Delay Start Button Extra Rinse Button Temperature ButtonAcoustic Signals Function Time Save ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesLoading the Laundry Using the ApplianceBefore First USE Check the position of the flap Filling the Detergent and AdditivesInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammeEnglish Detergents and Additives Hints and TipsLaundry Load Stubborn StainsWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132933910-A-312011