AEG L 70670 FL, L 70470 FL user manual Inlet Hose

Page 33

ENGLISH 33

• The appliance must be level and sta- ble.

CAUTION!

Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the lev- el.

THE INLET HOSE

45O

35O

Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position.

• Connect the water inlet hose to the cold water tap with 3/4 thread.

CAUTION!

Make sure that there are no leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose.

Image 33
Contents FL L 70670 FL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesOn OFF Button Control PanelDisplay Programme KnobSTART/PAUSE Button Delay Start Button Acoustic Signals Function Temperature ButtonTime Save Button Extra Rinse ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesUsing the Appliance Before First USELoading the Laundry Check the position of the flap Filling the Detergent and AdditivesSetting and Starting a Programme Cancel a ProgrammeInterrupt a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionEnglish Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132933910-A-312011