AEG L 70470 FL, L 70670 FL Safety Information, General Safety, Care and Cleaning, Installation

Page 4

4

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

For your safety and the safety of your property

To help the environment

For the correct operation of the ap-

pliance.

Always keep these instructions with the appliance also if you move or give it to a different person.

The manufacturer is not responsible if an incorrect installation and use causes damage.

products in, near or on the appliance. Risk of explosion or fire.

Obey the safety instructions on the detergent packaging to prevent burns to eyes, mouth and throat.

Make sure that you remove all metal objects from the laundry. Hard and sharp material can cause damage to the appliance.

Do not touch the glass of the door while a programme operates. The glass can be hot (only for front-load- ing appliances).

CHILDREN AND VULNERABLE PERSON SAFETY

Do not let persons, children inclu- ded, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervi- sion or instruction for the operation of the appliance by a person who is responsible for their safety. Do not let children play with the appliance.

Keep all packaging away from chil- dren. There is the risk of suffocation or injury.

Keep all detergents away from chil- dren.

Keep children and pets away from the appliance when the door is open.

Before you close the appliance door, make sure that children and pets are not into the drum.

If the appliance has a child safety de- vice, we recommend to activate it.

GENERAL SAFETY

Do not use the appliance for profes- sional use. The appliance is only for domestic use.

Do not change the specifications of this appliance. There is the risk of in- jury and damage to the appliance.

Do not put flammable products or items that are wet with flammable

CARE AND CLEANING

Deactivate the appliance and discon- nect the mains plug from the mains socket.

Do not use the appliance without the filters. Make sure that the installation of the filters is correct. An incorrect installation causes water leakages.

INSTALLATION

The appliance is heavy, be careful when you move it.

Do not transport your appliance with- out the transit bolts, you can damage internal components and cause leak- ages or malfunctions.

Do not install and connect a dam- aged appliance.

Make sure to remove all packaging and transport bolts.

Make sure that the mains plug is dis- connected from the mains socket during installation.

Only a qualified person must do the electrical installation, the plumbing and the installation of the appliance. This to prevent the risks of structural damage or injury.

Do not install or use the appliance where the temperature is less than 0 °C.

When you install the appliance on a carpet floor, make sure that there is

Image 4
Contents FL L 70670 FL Contents ServiceFor Perfect Results Accessories and ConsumablesVisit OUR Website for Safety Information General SafetyCare and Cleaning InstallationWater connection Discard the ApplianceEnvironment Concerns Technical InformationPackaging Materials Ecological HintsAccessories Product DescriptionControl Panel On OFF ButtonDisplay Programme KnobSTART/PAUSE Button Delay Start Button Temperature Button Acoustic Signals FunctionTime Save Button Extra Rinse ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Consumption Values Programme Energy consumption Water consumpBefore First USE Using the ApplianceLoading the Laundry Filling the Detergent and Additives Check the position of the flapCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme SET the Delay Start Cancel the Delay StartAT the END of the Programme Change a FunctionEnglish Hints and Tips Laundry LoadStubborn Stains Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpPage Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainageEnglish 132933910-A-312011