AEG L 70670 FL, L 70470 FL user manual START/PAUSE Button Delay Start Button

Page 9

ENGLISH 9

B• The default spin speed of the programme.

'No Spin'1) and 'Rinse Hold' symbols.

CThe display symbols.2)

Symbols Description

Washing phase

Rinse phases

Spin phase

Child lock

You cannot open the appliance door when the symbol is on. You cannot open the appliance door when the symbol flash- es. Wait for some minutes before you open the door.

You can open the door only when the symbol goes off.

If the programme is completed but the symbol stays on:

There is water in the drum.

The 'Rinse Hold' function is on.

Delay start

D• The programme time

When the programme starts, the time decreases with steps of 1 minute.

The delay start

When you press the delay start button, the display shows the delay start time.

Alarm codes

If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.

Err

The display shows this message for some seconds if:

You set a function that is not applicable for the programme.

You change the programme while it operates.

The indicator of the Start/Pause button 4 flashes.

When the programme is completed.

1)Only available for Spin/Drain programme.

2)The symbols appear on the display when the related phase or function is set.

START/PAUSE BUTTON

4

DELAY START BUTTON

5

Press button

4

to start or interrupt a

Press button

5

to delay the start of a

programme.

 

 

programme

from

30 minutes to 20

 

 

 

hours.

Image 9
Contents FL L 70670 FL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesOn OFF Button Control PanelDisplay Programme KnobSTART/PAUSE Button Delay Start Button Acoustic Signals Function Temperature ButtonTime Save Button Extra Rinse ButtonPermanent Extra Rinse Function Programmes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesUsing the Appliance Before First USELoading the Laundry Check the position of the flap Filling the Detergent and AdditivesSetting and Starting a Programme Cancel a ProgrammeInterrupt a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionEnglish Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132933910-A-312011