Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.
What to do if...
Remedying minor malfunctions yourself
If the programme progress display shows one of the following error messages during operation:
–E (END) flashes 1x (problem with water inflow),
–E (END) flashes 2x (problem with water outflow),
–E (END) flashes 4x (door open),
please refer to the following table.
After the error has been remedied, press the S/P (START/PAUSE) but- ton.
For other error messages (one or more flashing indicators in the pro- gramme progress display):
Switch the appliance off and then on again. Reset the programme. Press the S/P (START/PAUSE) button.
If the error is displayed again, please contact customer service.
Problem | Possible cause | Remedy | |
| Mains plug not plugged in | Connect the plug to a mains | |
| or fuse not working. | socket. Check fuse. | |
Washing machine is not | Door not closed properly. | Close door until the catch | |
audibly latches. | |||
working. |
| ||
|
| ||
| The S/P (START/PAUSE) | Press the S/P (START/ | |
| button was not pressed for | ||
| PAUSE) button for longer. | ||
| long enough. | ||
|
| ||
The door cannot be | Child safety device has been | Deactivate the child safety | |
closed. | activated. | device. | |
The E (END) indicator | The door is not closed prop- | Close the door properly. Re- | |
flashes 4x. | erly. | start the programme. | |
|
|
|
19