Water inflow
A 1.35 m long pressure hose is supplied with the appliance.
If a longer water inlet hose is required, only original hoses are to be used. The Customer Care Department stocks hose kits of different lengths.
3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts . Do not use any other seals. Important! All threaded hose fit-
tings must only be tightened by hand.
1.Connect the hose with the
gle connector to the machine.
Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.
2.Connect the hose with the straight
connector to a water tap with an R ¾ (inch) screw thread.
3. Open the water tap slowly and check all connections for water tightness.
32