AEG 52610 manual Tap turned off Turn on the tap E END indicator

Problem	Possible cause	Remedy
	Tap turned off.	Turn on the tap.
The E (END) indicator	The filter in the screw con-	Turn off the tap. Unscrew the
flashes 1x.	nection on the inlet hose is	hose, remove the filter and
(Problems with water	blocked.	clean it.
inflow)	Water tap is furred with	Check the tap and have it re-
	lime scale or is faulty.	paired if necessary.
	The transportation lock has	Remove the transportation
The washing machine	not been removed.	lock.
vibrates when operating	The screw feet are not cor-	Adjust the feet as described
or is not stable.
		in the installation and con-
	rectly adjusted.
		nection instructions.
Washing has not been	Only a few large items of	Always load the drum as full
		as possible. Mix large and
spun.	washing in the drum.
		small items.
	Screw connection on the in-	Screw the inlet hose on
	let hose is leaking.	tightly.
	Drain hose is leaking.	Replace drain hose.
Water is running out	Drain pump cover is not	Close the cover properly.
from under the washing	closed properly.
machine.	Washing was caught in the	Load washing carefully for
	door.	the next wash.
	Emergency drain hose is	Close off emergency drain
	leaking.	hose properly.
Wash water is foaming	Too much detergent has	Follow the manufacturer's
		instructions exactly when
excessively.	probably been used.
		measuring out detergent.
	Kink in drain hose.	Straighten the hose.
	Maximum pumping height	Please contact customer
	of 1m has been exceeded.	service.
The E (END) indicator		Switch off the appliance. Re-
flashes 2x.
		move the mains plug.
(Problems with water
	Drain pump is blocked.	Clean the drain pump. Re-
outflow.)
		move any foreign objects
		from the pump housing.
	For sink spigot connections:	Clean the sink spigot.
	The sink spigot is blocked.

20