3.Remove both plastic caps sideways.
3 Special spanner A and sealing caps B (2 off) and C (1 off) are supplied with the appliance.
4.Remove screw D with its compres- sion spring using special spanner A.
5.Turn sealing cap C upside down as shown in the illustration.
6.Seal hole using sealing cap C.
7.Unscrew and remove two screws E using special spanner A.
8.Unscrew and remove four screws F using special spanner A.
9.Remove transit bar G.
10.Screw in the four screws F again.
11.Seal the two big holes using sealing caps B.
Important! Press all sealing caps B (2 off) and C (1 off) in firmly, so that they snap into place. (Splash protec- tion).
29