AEG 52610 manual Fabric softener not

Problem	Possible cause	Remedy
Fabric softener not	Fabric softener insert in the
rinsed in,		Clean the detergent drawer,
	compartment for condition-
w compartment for	ers is not correctly inserted	insert the fabric softener
conditioners is filled		insert firmly.
	or is blocked.
with water.
		Wait until the K (DOOR) in-
	Door locked.	dicator has gone out and the
		E (END) indicator is illumi-
		nated.
The door cannot be		The programme will continue
opened when the wash-		when the power cut is over.
ing machine is switched	There has been a power cut.	To remove washing:
on.	(All indicators are off.)
		If water can be seen in the
	The door will remain locked
		appliance, first drain the wa-
	for approx. 2 minutes.
		ter before opening the door
		(see section ”Carrying out an
		emergency drain”).
Washing is very creased.	Too much washing may	Observe maximum loads.
	have been loaded.

21