AEG 50212 Setting the delay timer, Starting a programme, Interrupting a programme/adding washing

Page 15

Setting the delay timer

The (DELAY TIMER) button allows you to delay the start of a programme.

1.Select a programme.

2.Press the (DELAY TIMER) button once if you would like the wash programme to begin in 6 hours. The 6h indicator will illuminate. Press the (DELAY TIMER) button twice if you would like the wash pro- gramme to begin in 3 hours. The 3h indicator will illuminate.

3If you press the (DELAY TIMER) button once again the delay timer setting is cancelled. The indicator goes out.

3.To activate the delay timer, press the (START/PAUSE) button. Note: If a start delay of 6 hours is selected, the 6h indicator will illumi- nate. After 3 hours the indicator will change and 3h will illuminate. Af- ter a total of 6 hours the wash programme will begin.

Starting a programme

1.Check that the tap is turned on.

2.Press the (START/PAUSE) button. The programme starts or will start after the delay timer has elapsed as set.

During the wash programme the current stage of the programme is shown in the programme progress display.

3If after pressing the (START/PAUSE) button the (END) display flashes 4x, the door has not been closed properly. Push the door firmly

closed and press the (START/PAUSE) button again.

Interrupting a programme/adding washing

Interrupting a programme

A washing programme can be interrupted at any time by pressing the

(START/PAUSE) button. It is then re-started by pressing the

(START/PAUSE) button again.

To stop the washing machine before the programme has ended, turn the programme knob to (OFF). Important! Be careful if there is water in the appliance!

Adding washing

It is possible to add washing, as long as the (DOOR) light is not lit.

1.Press the (START/PAUSE) button. The door can be opened.

2.Shut door and press the (START/PAUSE) button again. The pro- gramme continues.

15

Image 15
Contents Lavamat 50212/50612 Dear customer Following symbols are used in the textContents Installation and connection instructions Follow the Instructions for installation and connection SafetyPrior to using for the first time Child safetyThis could constitute a fire hazard through overheating General safetyControl Panel Description of the applianceProgramme Programme overviewApplication/Features Care Sorting washing Before the first washPreparing and sorting washing Preparing washingFor USA and Canada only Running a washing cycleOpening the door/Loading the washing Adding detergent/additivesIf you use liquid detergents Washing powder/tablets for the main washChanging the spin speed/Selecting rinse hold Switching on the appliance/selecting a programmeDeactivating RINSE+ Selecting programme optionsActivating/deactivating RINSE+ Activating RINSE+Interrupting a programme Setting the delay timerStarting a programme Interrupting a programme/adding washingIf Rinse Hold was selected End of the wash programme/Removing the washingReleasing the child safety device Child safety deviceCleaning and maintenance Cleaning procedureDetergent dispenser drawer Washing drumDoor and rubber collar Remedying minor malfunctions yourself What to do ifOnly a few large items After the last rinse foam can still be seen If the wash results are not satisfactoryWashing is grey and scale is being deposited in the drum There are grey stains on the washingCarrying out an emergency drain When the water has all drained awayDrain pump Disposal Packaging materialOld appliance Consumption values Technical dataSafety information for the installation Installing the applianceTransporting the appliance Unpacking When moving using a sack trolleyPage Where to install Permitted water pressure Connecting to the water supplyElectrical connection Making the appliance levelOpen the porthole and extract the inlet hose Aqua ControlWater drainage Pumping heights over 1 mDraining water into a wash basin/bath Guarantee/Customer Service Service & Repair User Instructions & Installation ManualService 132 975 Subject to change without notice