AEG 50612, 50212 manual Detergent dispenser drawer, Washing drum, Door and rubber collar

Page 18

Detergent dispenser drawer

The detergent dispenser drawer should be cleaned regularly.

1.Remove the detergent dispenser drawer by pulling it firmly.

2. Remove the conditioner insert from the middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will go, so that it is firmly in place.

5.Clean all parts of the washing ma- chine, especially the nozzles in the

top of the washing-in chamber, with a brush.

6. Insert the detergent dispenser draw- er in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scour- ing agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stain- less steel.

2.Run a washing cycle without any washing to clean off any cleaning

agent residues. Programme: (COTTONS/LINEN) 95, add approx. 1/4 measuring cup of washing powder.

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

18

Image 18
Contents Lavamat 50212/50612 Following symbols are used in the text Dear customerContents Installation and connection instructions Child safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral safety This could constitute a fire hazard through overheatingDescription of the appliance Control PanelProgramme overview ProgrammeApplication/Features Care Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent/additives Running a washing cycleOpening the door/Loading the washing For USA and Canada onlyWashing powder/tablets for the main wash If you use liquid detergentsSwitching on the appliance/selecting a programme Changing the spin speed/Selecting rinse holdActivating RINSE+ Selecting programme optionsActivating/deactivating RINSE+ Deactivating RINSE+Interrupting a programme/adding washing Setting the delay timerStarting a programme Interrupting a programmeEnd of the wash programme/Removing the washing If Rinse Hold was selectedCleaning procedure Child safety deviceCleaning and maintenance Releasing the child safety deviceDetergent dispenser drawer Washing drumDoor and rubber collar What to do if Remedying minor malfunctions yourselfOnly a few large items There are grey stains on the washing If the wash results are not satisfactoryWashing is grey and scale is being deposited in the drum After the last rinse foam can still be seenWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information for the installation Installing the applianceTransporting the appliance When moving using a sack trolley UnpackingPage Where to install Making the appliance level Connecting to the water supplyElectrical connection Permitted water pressureAqua Control Open the porthole and extract the inlet hoseWater drainage Pumping heights over 1 mDraining water into a wash basin/bath Guarantee/Customer Service User Instructions & Installation Manual Service & RepairService 132 975 Subject to change without notice