AEG 50212, 50612 manual What to do if, Remedying minor malfunctions yourself

What to do if...

Remedying minor malfunctions yourself

If the programme progress display shows one of the following error messages during operation:

– (END) flashes 1x (problem with water inflow),

– (END) flashes 2x (problem with water outflow),

– (END) flashes 4x (door open),

please refer to the following table.

After the error has been remedied, press the (START/PAUSE) but- ton.

For other error messages (one or more flashing indicators in the pro- gramme progress display):

Switch the appliance off and then on again. Reset the programme.

Press the (START/PAUSE) button.

If the error is displayed again, please contact customer service.

	Problem	Possible cause			Remedy
		Mains plug not plugged in		Connect the plug to a mains
		or fuse not working.		socket. Check fuse.
Washing machine is not		Door not closed properly.		Close door until the catch
				audibly latches.
working.
		The	(START/PAUSE)	Press the	(START/
		button was not pressed for
				PAUSE) button for longer.
		long enough.
The door cannot be		Child safety device has been		Deactivate the child safety
closed.		activated.		device.
The	(END) indicator	The door is not closed prop-		Close the door properly. Re-
flashes 4x.		erly.		start the programme.
		Tap turned off.		Turn on the tap.
The	(END) indicator	The filter in the screw con-		Turn off the tap. Unscrew the
flashes 1x.		nection on the inlet hose is		hose, remove the filter and
(Problems with water		blocked.		clean it.
inflow)		Water tap is furred with		Check the tap and have it re-
		lime scale or is faulty.		paired if necessary.
		The transportation lock has		Remove the transportation
The washing machine		not been removed.		lock.
vibrates when operating		The screw feet are not cor-		Adjust the feet as described
or is not stable.
				in the installation and con-
		rectly adjusted.
				nection instructions.

19